Sepro Systems

Drive System PDF Print E-mail

Sepro Scrubbers have a modular drive system, a dedicated motor, coupling and gearbox for each pair of driving wheels.

All driving support wheels are individually mounted for ease of fitting and removal.

Other manufacturers offer continuous inline drive shafts with multiple wheels, which result in several hours downtime to change one wheel compared with a few minutes for Sepro machines.

Sepro machines above 1.8 diameter have integral jacking cradles and moveable hydraulic jacks, which enable the shell to be easily lifted off the tyres for maintenance on wheels, tyres, drives, etc; when required.
  • DRIVE, fixed speed and inverter regulated variable speed options are available. Fixed speed units incorporate hydraulic coupling in each drive unit for "soft" starting.
Fixed speed scrubbers can be staggered-started with a short delay between energising individual motors in order to minimise total motor inrush current. This is a significant advantage on plants with limited power supplies or tight maximum demand constraints.
  • TYRE SIZE, rating and tread patter are selected from manufacturer's standard range for optimum performance under low speed, constant power and steady load conditions of the application. TYRES are readily available from normal distributors.
  • GUIDE ROLLERS are moulded from resilient Heavy-Duty polyamide to ensure smooth running and low wear and incorporate dual associated maintenance. Drives incorporate hydraulic couplings for "soft" starting.
  • V-BELT drives allow speed to be easily changed if duty changes or to suit cariations in Ore type or process requirements.
 
You are here  : Home Drive System